RappiDelta JR 3d Printer

Print these and add a few components to have a fully working Delta 3d Printer.
You will need:
3 x Arms
1 x Base
1 x End Effector
1 x Top (MK1, MK2, or the new MK3 with internal wiring runs)
3 x Uprights
6 x Hangers
In addition to the printed parts you will need:
3 x Nema 17 geared steppers
1 x Nema 17 stepper
1 x control board
3 x endstops
1 x heated bed
1 x J Type hotend
1 x extruder (Tito is my favourite)
2 x push fit connectors
6 x 4mm carbon rods
12 x Traxxas rod ends
500mm Teflon tubing
various screws
Some wire
This was a failed Kickstarter, but hopefully it is of use to someone