Stinger - Modular Semi Automatic rubber band gun by jvhazendonk

 Я сделал эту модель. Дизайн интересный, мне понравилось. Но если заряжать больше 3-4 резинок, они могли застревать между колесом

и корпусом. И еще последняя резинка зацеплялась и плохо соскальзывала с
колеса. У меня были резинки размером 60 мм.
Я немного изменил форму колеса и детали, называемой "rubber_guide". А
также я уменьшил толщину колеса до 5 мм. И увеличил толщину "rubber_guide"
до 3.2 мм. Теперь можно легко зарядить по крайней мере 6 резинок.
Еще я просверлил прицел, основание прицела, и детали "front_right" и
"front_left". Как сверлил видно на фото. Теперь прицел можно закрепить
кусочком филамента и он не будет вываливаться. А при необходимости можно экспериментировать с формой и размером прицела и легко его менять.
Ну и добавил значек в паз на рукоятке. Мне кажется так выглядит немного интереснее.

Основные файлы находятся здесь:
https://www.thingiverse.com/thing:2614430
Я выложил только файлы измененных деталей.

And now translation via Google translate.

 I made this model. The design is interesting, I liked it. But if you load more than 3-4 rubber bands, they could get stuck between the

wheel and the body. And the last rubber band caught on and slipped badly off the
wheel. I had 60mm rubber bands.
I changed the shape of the wheel a bit and the part called 'rubber_guide'. I also
reduced the thickness of the wheel to 5 mm. And increased the thickness of the 'rubber_guide' to 3.2 mm. You can now easily load at least 6 rubber bands
I also drilled the sight, the base of the sight, and the 'front_right' and 'front_left'
details. How drilled but the photo can be seen. Now the sight can be fixed with a
piece of filament and it won't fall out. And if necessary, you can experiment with the
shape and size of the sight and easily change it.
Well, I added a badge to the groove on the grip. It looks a little more interesting
to me.

The main details are here:
https://www.thingiverse.com/thing:2614430
I only posted the modified parts files.