Summary

Hey all,

I printed a desktop solar lamp as a headphone holder. Inside is a Led strip with multi colour option. I forget the skirt at least. Now I have one single printed line around the solar system name:)

Print Settings

Printer:

Artillery Sidewinder X1

                                            <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.3 and 0.2</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>10%</p></div></p>                                                    <strong>Filament:</strong> No name PLA                Black, Red, Transparent and White                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>Solar-Lamp Body:<br>0.3 mm layer height. 120 mm/s Speed. 205° C Nozzle and 70° C Bed (Layer 3 = 50° C).<br>I split this print into serval pieces for colour changing (see the attached sketch!).<br>With each layer change, I put the settings without the bottom and top layers.</p><p>Be careful with the heights of the printers frame. If you print the body and you have choose a wrong position on the bed, the printer might be hit the printed part for homing all axis! </p><p>Solar-Lamp Front:<br>80 mm/s. 100 % infill for the symbols. The transparent part is 5 mm in height and the infill is also 10 % honeycomb.</p></div>

Solar Lamp and Headphone Holder