Tone Foregrip for SAE Hardware

This is a really simple remix of the Tone Angled Foregrip by TheLoneWolf052 that will work with a #10-32 nut and bolt instead of an M5. The only change I made was resizing the hex cutout in the Tone_foregrip_bracket.stl for the #10-32 nut. The rest of the files fit a #10-32 bolt without modification so I didn't mess with them. You will still need to download the rest of the grip from the original upload by TheLoneWolf052.

Hardware required:
1x 1.25in. #10-32 bolt (actually maybe 1 inch is long enough, will have to test)
1x #10-32 nut
(should work fine with #10-24 as well)