OpenForge 2.0 Roof 2x1.0 with Chimney

OpenForge 2.0 Roof 2x1.0 with Chimney v1.x

Roof tile which can be used above a chimney facade tile on the "long" side of a house.

Printing Notes

Test-printed with the following settings on a "Prusa Mini":
slicer: PrusaSlicer (Slic3r)
filament: PLA
nozzle: 0.4 mm
layer height: 0.10 or 0.15 mm
infill: 10%
supports: not necessary

Credits

Based on Devon Jones great OpenForge tiles and remixed from:
https://www.myminifactory.com/object/3d-print-buildings-stone-brick-cottage-139890

License

Creative Commons - Attribution 4.0 International (CC BY 4.0)
https://creativecommons.org/licenses/by/4.0/

Version History

2021-02-28 v1.0.0

• initial version