Summary

This is simple stand for OnePlus 7/7T/Pro. It's designed for phone which has protective case so without it the phone might not be that steady.

Features:

It has a little sound director for phone speaker.
Bottom part can be joined to the phone part and that way whole phone stand takes less space.
It's possible to charge phone while horizontal position.

Print Settings

Printer Brand:

Prusa

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>I3 MK3S</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>Yes</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0,1</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>20%</p></div></p>                                                    <strong>Filament:</strong> - PLA                -                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>Please note:</p><ul><li>Little "screw" should be printed at 0.1mm resolution and 90% infill. This makes it stronger and wont break.</li><li>Make sure screw holes are filled correctly with support material. This might take some trial&amp;error slicing. Otherwise printing will fail if not done correctly.</li></ul><p>Try these for support:</p><ul><li>Pattern spacing: 0.4mm</li><li>Interface pattern spacing: 0.2mm</li><li>Don's support bridges: false</li></ul></div>

OnePlus 7 phone stand