Unicorn (horse reloaded)

Much thanks for the original!

Completly redrawn every piece in Inkscape, so that all paths of a piece are combined to one aligned path with much fewer knots, adjusted to typical plywood with 3,75mm thickness.
Slightly modified one leg for a better stand.
Modified the head, that it can contain a cr2032 battery and a multicolor LED.

ToDo:

• better layout of the battery position & alignment for a wooden "pushbutton", so that the horn only glows on pressure on the side.
• draw eyes for engraving with the lasercutter
• generate a horn out of plexi with ornament, which glows with the LED