Summary

Made another novelty buffer end for Thomas Adventures

Post-Printing

The small round hinges on the gate part need to be squeezed a little by a pair of pliers in order to make them narrow enough but still strong enough to just click into place, too hard and you break them!

If there's a bulge at the bottom of the print you'll need to file it off of all the surfaces on the joint to make it fit the track correctly.

Such a bulge means your printers bed isn't level.

How I Designed This

Took the connector from
https://www.thingiverse.com/thing:3074865
and made the rest myself.
Used 3D Builder

Thomas Adventures Guarded Ramp for buffer end.