Summary

This is just a simple hook designed to mount a EeeTop model: ET2203 as well as the ET2203T to the wall without any modifications or damage.

Though if you use the Power Supply clamps, you'll have to drill 4 small holes to mount it.

Instructions

I printed the hook at %100 fill, but that was overkill. I would print it at ~30% in the future.

You'll also need a 2x4 that is at least 10" to mount the hook on. First, mount the 2x4 to the wall by whatever means nessicary (I screwed it into a stud), then mount the hanger to the board at the appropriate height to the board will sit just below the stands curve; using 1.2-2" screws. The pictures will help this make sense.

The power supply I used was non-OEM, to help with some power issues I was having. It was mounted by drilling 4 small holes in the PC housing.

I love having a big touch computer in the kitchen, its fantastic for long cooking sessions and reference.

Asus EeeTop Wall Hanger with Power Brick Clamps