Summary

Designed this in Tinkercad, with help of their premade connectors, my son loves the Game Fun with Ragdolls and there was nothing to print yet.
Link to the Figure on Tinkercad: https://www.tinkercad.com/things/b1q39482dWf
Link to the Game: https://store.steampowered.com/app/1142500/Fun_with_Ragdolls_The_Game/

Printing:

Nothing special about printing, you can use support for the ball joint connections, it might work without but never tried it.

Print Settings

Printer Brand:

Creality

Printer:

Ender 3

Rafts:

No

Supports:

Yes

Resolution:

0.20

Infill:

10

Filament: - PLA

Notes:

Cura Settings exported for the print if you want it:

[values]
acceleration_enabled = False
adaptive_layer_height_enabled = False
adaptive_layer_height_variation = 0.08
adaptive_layer_height_variation_step = 0.04
adhesion_type = none
jerk_enabled = False
layer_height = 0.2
layer_height_0 = 0.2
retraction_combing = noskin
support_enable = True
support_tree_enable = False
support_type = everywhere

creality_base_extruder0#2_magic0.20ragdoll#3[general]
version = 4
name = Magic0.20 ragdoll #3
definition = creality_base

[metadata]
intent_category = default
setting_version = 10
position = 0
quality_type = super
type = quality_changes

[values]
acceleration_print = 350
bottom_layers = 3
cool_fan_full_at_height = 0.2
default_material_print_temperature = 205
fill_perimeter_gaps = nowhere
filter_out_tiny_gaps = True
infill_before_walls = False
infill_enable_travel_optimization = True
infill_overlap = 15
infill_pattern = lines
infill_sparse_density = 10
infill_sparse_thickness = =resolveOrValue('layer_height')
initial_layer_line_width_factor = 120.0
jerk_print = 8
line_width = =machine_nozzle_size
material_final_print_temperature = 190
material_flow = 100
material_flow_layer_0 = 109
material_initial_print_temperature = 205
material_print_temperature = 205
outer_inset_first = True
retraction_amount = 2
retraction_hop = 0.4
retraction_hop_enabled = False
retraction_speed = 25
skirt_line_count = 2
speed_infill = =speed_print
speed_layer_0 = 15.0
speed_print = 80
speed_travel = 90
speed_wall_x = =speed_wall
support_angle = 50
support_bottom_enable = False
support_brim_enable = True
support_brim_line_count = 50
support_interface_enable = True
support_roof_enable = =extruderValue(support_roof_extruder_nr, 'support_interface_enable')
support_top_distance = =extruderValue(support_roof_extruder_nr if support_roof_enable else support_infill_extruder_nr, 'support_z_distance')
support_tree_angle = 50
support_tree_branch_distance = 0.2
support_use_towers = False
support_xy_distance = 0.5
support_z_distance = 0.12
top_bottom_pattern_0 = concentric
top_bottom_thickness = =layer_height_0+layer_height6
top_layers = 3
travel_compensate_overlapping_walls_enabled = False
wall_line_count = =1 if magic_spiralize else max(1, round((wall_thickness - wall_line_width_0) / wall_line_width_x) + 1) if wall_thickness != 0 else 0
wall_thickness = =line_width3
z_seam_corner = z_seam_corner_inner
z_seam_type = back
z_seam_x = 0
z_seam_y = 41

How I Designed This

https://www.tinkercad.com/things/b1q39482dWf

Fun With Ragdolls Figure (articulated)