Fishbone peg

This is an "easy to print" peg.

Design with “Creo Element Direct modeling express” and printed in PLA on my Prusa i3.
(Creo source file is available at http://www.fabriqueurs.com/fabrications)
I made this peg for a 13mm diameter hole (use the scale factor to adapt it for another size)

It seems strong enough for my initial purpose (attach a light string) but I need to go forward and characterize how much it is really strong. Please, at this time, don’t use it for tying a children swing or a hammock...
This first try to design an easy to print peg made me want to go forward on the study of this subject (soon):
• Check and characterize the strength of this fixing system (depending on size of the peg, printing material, king of support,...)
• Test other printing materials: ABS, nylon, and why not in Filaflex (however I thing that soft materials will require a dedicated new design)
• Improvement of current model and design of other easy to print peg
o Dedicated to hollow walls
o Based on compression of a soft part
o …
Please improve this model and share your feedback. I would be happy to discuss the matter with you.
Pierre