Summary

OmniWrench from Ratchet and Clank

I used 12mm square wooden dowel to add strength through the whole thing and make putting all the pieces together a bit easier. It needs 1x 145mm & 1x 285mm pieces.

Print Settings

Printer Brand:

XYZprinting

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>Nobel 1.0A</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.2</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>15%</p></div></p>                                                    <strong>Filament:</strong> Unknown ABS                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>Supports are needed on Part 4 but that should be all. It was a while ago that i made this.</p></div>

Post-Printing

Stuck it all together with wooden cores using painters sealant/filler. Then a spray on base coat before painting it the final colour.

How I Designed This

Solidworks

OmniWrench - Ratchet and Clank