Another Enclosed Filament Holder

My printer shares space with my motorcycles and I needed to keep the filament from collecting dirt and oil from my maintenance debacles. The Tupperware is a common 15 cup tub, the side support pieces can be screwed together with M3-M4 size nuts and bolts from any hardware store. I stuff a piece a paper towel on the top to act as a low resistance break to keep the spool from unraveling and bird-caging, and I tossed a couple of desiccant packs to keep it dry. The hole at the bottom corner feeds the filament in through the top of my da Vinci 1.0 printer perfectly. The filament rack is 1/2 inch PVC with an extra spot for a open spool when I need to do a short run.