Summary

This attachment allows you to connect your workshop vacuum cleaner to two dust collection units on your table saw.

Instructions

The following printer settings are for the Ultimaker² with PLA:
Layer height = 0.1 mm
Shell thickness = 1 mm
Enable retraction = on
Bottom/Top tickness = 1.2 mm
Fill density = 20%
Print speed = 50 mm/s
No support type
No platform adhesion type

Initial layer thickness = 0.3 mm
Initial layer line width = 100%
Cut off object bottom = 0 mm
Dual extrusion overlap = 0.15 mm
Travel speed = 150 mm/s
Bottom layer speed = 10 mm/s
Infill speed = 0 mm/s
Outer shell speed = 0 mm/s
Inner shell speed = 0 mm/s
Minimal layer time = 5 s
Enable cooling fan = on

Table saw dual vacuum attachment