Routing template - Bunny - for small printer, too

This is a routing template. With this template and a flush cutter you can cut Easter Bunnys out of wood. The template can be attached to the wood with double-sided tape.

Smallest inner radius: 4.1mm

You have to use a flush cutter with a bearing. If you use one without bearing the plastic could melt. The radius of the trimming cutter can also be larger than the minimum radius of the template. You can make the inner radii larger or smaller.

Purchased parts:
Flush Cutter:
https://smile.amazon.de/gp/product/B079HZJVVY/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Tape:
https://smile.amazon.de/gp/product/B018GUBCWU/ref=ppx_yo_dt_b_search_asin_image?ie=UTF8&psc=1

Glue (only for small printer):
https://smile.amazon.de/gp/product/B07C8J3BHK/ref=ppx_yo_dt_b_search_asin_image?ie=UTF8&psc=1

Printer Settings:
Fill Rate: 100%

For manufacturing in parts:
glue gap: 0.0mm

I hope you like the design and I look forward to feedback.