Motorola Edge 20 Lite & Fusion xt2139 case
Thanks to James Woodgreaves for testing this caseThis case is for the Motorola Edge 20 Lite or Fusion, for the regular Motorola Edge 20 see this. Some of the models are designed for rigid materials and others for flexible ones. The models materials are not interchangeable, so pay attention to the file names. If you have any request on the design just ask me.
For other phone cases check this.
Here is the explanation of the files names:
I spend part of my time making these models, letting them available and free for everyone. If you want to support my work you can buy me a coffee in Ko-fi:
Si estás en Argentina podés invitarme a un cafecito:
For other phone cases check this.
Here is the explanation of the files names:
- Flex: made for elastic filaments like TPU. Requires support for the buttons and charger holes. Not tested.
- Rigid: made for rigid (non-elastic) filaments like PLA, ABS, HIPS, etc. The entire model is a little bigger and the holes for the buttons are opened on the front side. Not tested.
- Banded: It has regular horizontal grooves in the bed surface, to make the finished texture more regular, avoiding irregularities on that part, and bringing it a better grip.
- Rugged: Since these phones have a huge camera, I have to make a separated piece to cover it without making the back side to thick. You should print the "cam_protection.stl" if you want the camera protected, but you can still use the rugged case without it. The cam protection can either be used with flex and rigid cases, but I recommend to print this part in rigid materials (PLA, PETG or ABS)
References
I spend part of my time making these models, letting them available and free for everyone. If you want to support my work you can buy me a coffee in Ko-fi:
Si estás en Argentina podés invitarme a un cafecito: