# Summary

This is a whistle with a lanyard loop and a pea inside.
The letters and braille characters "VJA" are tactile and visible on the side of the whistle.

Instructions

Estimated printing time is 46 minutes.
Break the pea loose, with a Hex L-wrench (2 mm) for example, after printing.

Filament Material

Extrudr PLA NX2

Printer

Prusa i3 MK3S printer with 0.4 mm nozzle.

Printer Settings

• Layer height 0.2 mm
• 60 mm/s perimeter print speed
• Infill 20%
• No Supports

  Changes

  We put the letters and braille characters "VJA" on the side of the whistle.
  The letters and braille characters are generated with the OpenSCAD files vja-logo-generation.scad and braille.scad.
  We put the letters and braille characters with blender on the whistle, dib-whistle.blend.

  Contact

  https://oskars.org
  Johannes Střelka-Petz

Copyright & License

SPDX-FileCopyrightText: <text>Copyright 2022 Dajana Isakovic, Denis Sari, Johannes Strelka-Petz, Manuel Hauer, Mario Manseder, Roman Kloihofer</text>SPDX-License-Identifier: CC-BY-SA-4.0

This design is a joint effort by

• Dajana Isakovic
• Denis Sari
• Johannes Střelka-Petz
• Manuel Hauer
• Mario Manseder
• Roman Kloihofer

This work is licensed under the Creative Commons Attribution-ShareAlike 4.0 International License.

To view a copy of this license, visit http://creativecommons.org/licenses/by-sa/4.0/ or send a letter to Creative Commons, PO Box 1866, Mountain View, CA 94042, USA.

Original Work Attribution

This work is based on the Whistle designed by Zaggo