Woodworking Marking Gauge Tool

I started this remix because I had quite many broken carpenter meters at hand (like many of you I suppose).

Minor adaptations of the initial design:

• adapted the main guide dimension to fit a carpenter meter (15mm wide and 3mm thick)
• added a groove to the transversal part to get a tight locking of the meter
• extended the main body's front side to provides slightly better visibility (the locking nuts are not in the way any longer) and rigidity (questionable)
• add caps to the knobs

You can download the nut knob from the original design or use any other as long as their diameter is not too large.