LG 24mp88hv-s Monitor Stand

This is a stand for a monitor I bought used, that did not come with a stand.

I was going to make a VESA mount for this screen, but there are many out there, and most would cover the inputs on the back.

The paper template, I used to make a base from 12mm plywood. I don't think the shape is particularly critical.

And I just screwed the plywood to the bottom of the 3d printed part.

The two screws to mount are M4 16mm long.

I printed in PLA 2mm walls 2mm top and bottom, and 20% infil.

I made 2 for the screens I bought and they work great.