Summary

Because there isn't much available for Degu's specifically I decided to design a house myself for my 4 little girls. This house is still in development but they seem to love it. The version 1.0 was similar but considerably smaller. It worked but looked like a clown car when they all tried to pile in there together. So this version is much wider in length and a little deeper.

Print Settings

Printer Brand:

Creality

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>CR-10S</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>Yes</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>Yes</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.2mm</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>20%</p></div></p>                                                    <strong>Filament:</strong> Sunlou Wood                Natural                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>If you are finding it difficult to remove supports from the inside of the print you can turn the design on it's side in the slicer and change support settings to print in the "Y" or "Tree" pattern to limit both frustration and wasted material.</p></div>

Degu Hanging House v2.0