Orange Pi 3 LTS Case (no GPIO hole)

Remixed from "Orange Pi 3 LTS Case" by "silver-alx".

Summary

Case for the Orange Pi 3 LTS single board computer.
This edited design does not have direct GPIO access from the outside.

It is compatible with a small heatsink and a 30x30x7mm fan.
It is possible to use M2 screws for the fan and M3 screws to couple top and bottom.

Attached files

There are 3 .STL files attached:

• Top.stl - top only;
• Bottom.stl - bottom only;
• Combined.stl - both parts combined in a single file.

Print settings

In the next section you can find the print settings I used.