Summary

Logo for 11ty static site generator.

I printed to mount on my laptop (scaled 50% model size).

The two parts are:

The 11ty logo with bevel around the corners.
A shallow base to give contrast between the frame and letters.

I printed the frame black and base white, then glued the two together. Being such a small model, I printed at 100% infill. I also recommend 0.12mm layers to give the bevel more definition.

View model in Tinkercad:
https://www.tinkercad.com/things/b9EyS3S6KZf

Print Settings

Printer Brand:

Creality

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>CR-10</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.12mm</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>100%</p></div></p>                                                    <strong>Filament:</strong> Hatchbox PLA                Black, White

Post-Printing

Because of the beveled edges, I don't recommend ironing the top layer. Sanding with a 400-800 grit should help to erase the print lines on the top layer.

How I Designed This

11ty logo used for letters. Frame added to proportion with logo image.

11ty Logo