Summary

I changed out the aluminum plate, which was warped, to a 214mm square glass plate. This is a universal (LEFT, RIGHT) table holder to keep the heat plate and the glass snug...

Instructions

I changed out the aluminum plate, which was warped, to a 214mm square glass plate. This is a universal (LEFT, RIGHT) table holder to keep the heat plate and the glass snug.

Any comments and suggestions are really appreciated. I noticed that using the EZ3D software the STL file cannot be uploaded. File is too large. That is why I'm including a SolidWorks sketch file as well.

To get it to print correct size i ran the file through an online file converter (http://www.greentoken.de/onlineconv/) STL to STL. Then the file would import VERY tiny. SO i scaled the image 11 times bigger. Then after import, I deleted the part from EZ3D software, and imported the same STL file and scale it 2.2 times bigger. That's the size you need.

I don't know why but the software cannot accept the right dimentions. Maybe if the sketch was in METRIC...

Phoenix EZ3D Table Holder