Summary

Recently bought a well used MiniMax S45 18" bandsaw circa 1990's that I'm restoring. Didn't come with a table insert, so I made this. Reset the orientation flat to print.

Print Settings

Printer Brand:

Prusa

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>I3 MK3S</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>Doesn't Matter</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.15mm, 0.20mm</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>I used 100%</p></div></p>                                                    <strong>Filament:</strong> Generic PLA                Whatever                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>Final update.  Version 5 fits nice and snug, and I've added bevels to accommodate table tilt.  Calling this done. </p><p>I had great success printing with a 0.6mm nozzle with a 0.15 resolution.  Printing one took 23 minutes.  Looks like it was done with a 0.4mm nozzle.  I'm sure other nozzles will work just as well.</p></div>

MiniMax S45 Table Insert