Summary

A wide bridge to lock the halves of a Kinesis Advantage 360 in place with a wider separation than the provided one.

Includes files for the clips at each end so that you can easily create one with a width that's comfortable for you.

See the README.md for details.

Example Print

            <p class="detail-caption"><strong>a print of the bridge sitting on top of the keyboard.</strong></p>                <p class="detail-image"><img src="https://cdn.thingiverse.com/assets/8d/fb/97/dd/1f/745ac9f9-4062-4bc3-ba62-a63343699464.jpeg"></p>            <p class="detail-caption"><strong>a  print of the bridge installed. </strong></p>                <p class="detail-title"><strong>Installation</strong></p>            <div><p>There should be no need for any post-printing steps.</p><p>I use this bridge <em>under</em> the metal supports. It should be the same height as the little rubber feet. I suspect it'll work just fine going over too.</p><p>Hook the outer edge of one side's clip around the metal support, then snap the inner side. Repeat on the other half of the keyboard. This should require a small amount of pressure, and the resulting fit should be fairly snug. </p></div>

Kinesis Advantage 360 Wide Bridge