Rusco 3/4" and 1" Spindown / Sediment Filter Mount

A quick model I created to mount a Rusco 1" and 3/4" Spindown and Sediment Trapper filters. This print was tested on the 3/4" Spindown but I suspect it will work on the 1" as well.

There is about a millimeter play between the mount and the filter housing creating a loose fit where it's easy to swing the filter in the mount. Add a wrap of black tape (or the like) for a tight fit.

Printed on a Prusa Mini+ with PLA and .2mm with Prusa Slicer. Can fit 2 of the model on the Mini+ bed surface with no issue. About a 3hr print pictured.

4mm screw holes perfect for a 1" wood screw.

Print model on its side to eliminate need for supports. No rafts needed. Clean you print bed with alcohol for good adhesion.