Digital Caliper Case, Vase Mode

Whipped up a quick vernier digital caliper case for a cheap unit that didn't come with a case. Should fit most units and if not, a quick scale/edit to fit.
Top cover is a tight friction fit, so you may have to scale it depending on your printer.

Print both in vase mode.
Wall as thick as you can go (0.6mm on a 0.4mm nozzle, 0.9mm on a 0.6mm nozzle, etc).
0.3mm layer height with 3 bottom layers.

I also included a replacement battery cover for the calipers.