Summary

I Printed it standing up (Screen facing the front of the printer).
Ive been using the Case a few days now and Im happy with it. If the device should drop now, the battery will stay put.

Print Settings

Printer Brand:

Creality

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>Ender-3 S1 Pro</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>Yes</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.2</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>30%</p></div></p>                                                    <strong>Filament:</strong> REC PLA                White                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>Layer Height 0.2<br>Wall Thickness 0.8<br>Top/Bottom Thickness 0.8<br>Top Layers 4<br>Bottom Layers 4</p><p>Infill Density 30%<br>Infill Pattern Tri-Hexagon<br>Infall Support On</p><p>200°<br>60°</p><p>Print Speed 50<br>Infill Speed 50<br>Wall Speed 40<br>Top/Bottom Speed 25<br>Initial Layer Speed 25</p><p>Support Everywhere<br>Support Density 5%</p><p>Brim 20 Lines</p></div>

Post-Printing

You`re gonna have to sand the bottom support leftovers off.

Case for DBLG1 Handset