Octagonal Joystick Gate for Microcenter Universal Arcade - Control Kit

This is an octagonal gate to replace the square gate that comes with the arcade stick kit. I used the parts to make mine into a fight stick, but found that with a square gate I was jumping when holding back a lot.

The outer diameter is 58mm, and the screw holes are 45mm apart center to center.
The gate diameter is 25mm. The thickness of the plate is 2mm.

I am not sure of the long term durability of PLA at 2mm thick, but the original plate was closer to 4mm at least. At the moment it seems to work great.