Summary

This is Thing from Wednesday series. I did not model the hand but made all of the modifications to the hand using Meshmixer. I have also included the palm scar which seems to be not included in most of the models I have seen. This model is best printed at 100% 0.16mm layer height and no supports required. Printed with the wrist on the print bed, you may also use a 10mm brim to help with bed adhesion.

Print Settings

Printer Brand:

Sovol 3D

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>Sovol SV06</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.16</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>10%</p></div></p>                                                    <strong>Filament:</strong> Any PLA or PLA+                Skin colour if you have it                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>No supports required, print at 100% scale and at 0.16mmmlayer height. You may have issues around the start of the fingers if you print at 0.2mm layer height. A brim can be used as well 10mm to assist with bed adhesion.</p></div>