Summary

Why

Wanted a cheap soldering smoke extractor with exit far for the extraction.

Materials need

kind of 40mm diameter air pipe (got mine from dump by my father in law).
one or two 12cmx12xm PC cooling fans AliExpress Link
13cmx13cm active charcoal filter AliExpress Link
lead or heavy iron

More information on : https://github.com/youenchene/soldering-smoke-extraction-3D/

Print Settings

Printer Brand:

Geeetech

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>Geeetech A20M</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>Yes</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>Coarse (0.4mm)</p></div></p>                                                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>Use the STL in the stl folder.</p><p>Print on the larger blow hole, no support should be needed.</p><p>Prefer a raft for build plate adhesion.</p><p>It's a big piece and no precision is needed, you can go Coarse (0.4mm).</p></div>

Homemade Soldering Smoke Extractor

Why

Materials need