Phone Stand - Tablet Stand - Print-in-place

This 'print in place hinge' phone stand is based on the hinge design in this video:
https://www.youtube.com/watch?v=mGya4JMVGno&ab_channel=DesktopMakes

I included two parts:
-- One part with a 0.25 mm gap between hinge parts
-- A second part with a 0.50 mm gap between hinge parts

The instructions in the video are clear. I suggest creating your own design. My parts are 3.6 mm thick using 'magic numbers' for my Creality printer.

I printed parts with the 0.25 mm gap. I had to carefully flex the part back and forth to break the hinge free. If you flex the part too quickly the part will break. If a 0.25 mm gap doesn't work for you, try the 0.50 gap.

The stand will support a phone up to 16 mm thick. Also, the stand will support a tablet.

Diane Leonard suggested using a glue gun to add beads of glue on the bottom of the stand to prevent the stand from slipping on a flat surface. See the photo with the green arrows.