Summary

Here is my attempt at a replacement trigger and button for the Sega Saturn Virtua Gun/Stunner.

Please note: The trigger will only work when coupled with the trigger adapter and an arcade micro switch (see https://www.thingiverse.com/thing:6235014)

The trigger should also fit in the arcade gun shells but I haven't tested it.

Slight filing may be needed on the trigger to endure a snug fit on the shaft.

Print Settings

Printer Brand:

Prusa

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>I3 MK3S</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>Yes</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.2</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>20</p></div></p>                                                    <strong>Filament:</strong> Overture ABS                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>For the trigger, you can either print with supports or split the print and join together afterwards so it looks nicer.</p><p>I did this here then sanded the join and left both parts in acetone vapour for a few hours. Almost looks like injected moulded parts.</p></div>

Sega Saturn Virtua Gun/Stunner trigger and button