Summary

A simple Low Profile Keycap designed to fit the cheap, generic number pads (numpad) that you can find on Amazon. They don't use any fittings that I could find a model for, but I did find a model that came close, so I remixed it to fit!

I used TinkerCAD to modify the key itself to resemble the original key, and heavily modified the connection shaft to allow a nice fit while retraining a smooth-action feeling.

Happy Printing! Cheers!

Print Settings

Printer Brand:

Creality

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>Ender 3 Pro</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>Yes</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.12mm</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>100%</p></div></p>                                                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>The model can be printed either key-side down, or on it's shaft - if using the latter, ensure that you are using standard supports. I also highly suggest using the finest resolution that your printer supports to ensure a good quality print. </p><p>In my case, I print at 0.12mm and print it with the shaft-side on the bed with normal supports. </p></div>

Keypad (Numpad) Low Profile Keycaps