RB-A9 Blaster (Robocop Auto-9 Blaster)

Made this from a 2d design by Apocalypsebob per his request.

This version is about 45cm long total. Scale up or down parts to change this.

PRINTING:

1. Print all the A+B parts. Print them with splitline on printbed, shouldnt need supports that way.
2. Glue them using the 10mm pins.
3. Print the barrel/nozzle. I would print it top-down on the bed and make a little support for the ironsight.
4. Print the Greeblie flat side down on bed.

5. Glue all parts together, use the 20mm pins for connecting the cooler and the frontgrip. All other connectors for glueing are integrated.

6. Make it look cool!