Summary

Be sure to check the geometric parameters of your BT5.0-Audio.
Enjoy my 3D models? Support me on Ko-fi
Print Settings

Printer:
Fribot Z-Belt-W
                                            <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>Yes</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>Yes</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0,3</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>30 %</p></div></p>                                                    <strong>Filament:</strong> MonoFilament ABS                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>Before printing, I kindly ask you to check the geometry of your board with the one in the BT5.0-Audio.stl file. Jacks should protrude beyond the edge of textolite. It is connected by two countersunk screw M2x10. Screw threads are cut by screws in hard plastic holes, which are pre-drilled with 2 mm drill. ABS plastic. For a USB hole, it is advisable to make supports, although you know better. Layer - 0.3 mm, 30% filling. The LED does not even penetrate the wall thickness on the logo, but its light still passes through the side grilles, so that it remains functional. Dimensions: 35x35x13 mm.<br>Sorry for my English.</p></div>
Case for BT5.0-Audio
