Summary

This is a gold coin based off of the 2015 King's Quest game. I set it up with a stand so that you can print it upright for maximum shininess. No supports needed, but I recommend using a brim!

After printing, gently wiggle the base free from the coin. It should snap away clean. If not, try lowering the temperature and slowing down the print a little.

Print Settings

Printer Brand:

FlashForge

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>Adventurer 3</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>Yes</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>.18</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>100</p></div></p>                                                    <strong>Filament:</strong> Mika3D Silk PLA                gold                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>Use a brim! After printing, gently wiggle the base free from the coin. It should snap away clean. If not, try lowering the temperature and slowing down the print a little.</p></div>

King's Quest Gold Coin