Summary

This is a fun ring frisbee to play with friends and family. It has a flat base for easy printing without supports. The model has a diameter of 160mm, however, you can scale it to the size you require.

Though it shouldn't really need to be said: CAUTION - Throwing a hard plastic ring at someone can result in injury if not used with care.
You could reduce this risk be printing using a flexible material such as TPU.

Print Settings

Printer Brand:

Creality

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>Ender-6</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>Doesn't Matter</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.1-0.2mm</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>10%  or higher</p></div></p>                                                    <strong>Filament:</strong> eSun Any, I just used PLA for ease of printing                Any, but I'd recommend one that's easily visible                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>For best results, make sure the model doesn't warp, I used a brim but this isn't necessary if you have a well levelled bed and good adhesion.</p></div>

Post-Printing

The edges can be a bit sharp so I'd advise giving them a light sand before use. Other than that and removing the brim if you've used one, it's ready to go!

How I Designed This

This model was designed in Fusion 360. I used the revolve tool to create the ring from a sketch of the cross section.

Ring Frisbee