Summary

Remixed from provided part due to fitment and printing issues.

Print Settings

Printer:

380MC

                                            <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>Yes</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>.007 in</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>100%</p></div></p>                                                    <strong>Filament:</strong> proprietary ABS                black

How I Designed This

                <p class="detail-title"><strong>Remixed from available file</strong></p>            <div><p>Printed this the first time, turns out the knob at the top and the shaft on the spacer are 2 separate parts. My slicer recognized this, but I assumed it would be okay in printing. The print, however, didn't turn out to work as the knobs were not attached to the spacer at all. </p><p>I modified some of the geometry to make them one piece and I also added a chamfer on the underside of the knob end to prevent the need for supports underneath it. I also edited the geometry around the snap part to be simpler and to function better without the need for complex support removal. </p><p>Additionally, I tightened up the hole for attachment to the Hyte's glass side panel as the default version was much too loose. At least for my setup. It's a much more "Snappy" press fit now.</p></div>

Riser Remixed