Wii HDMI Installation Cutting Jig

A simple jig to assist with cutting the holes for the HDMI port and the IR Remote programming button for my Wii HDMI mod. This should also be compatible with the Wii Dual by Citrus3000psi, but I have not personally tested this.

To use simply place it on the back of the Wii shell and let the pegs align with the outside edge of the rear exhaust grid, then drill the HDMI holes with the appropriately sized drill bit. Flip the jig over and drill the IR hole. For the HDMI port simply cut/file the material between the two holes you drilled and square up the corners of the holes and you should get a perfect fit with the HDMI port.