Salanki VR gunstock simplified version

Changes

Changed Stock tube to fully printed to reduce weight, applied a 15 degree slant on the tube body to strengthen the Z-axis.
Added a piece of printed magnet support inside the magnet cup to adapt smaller magnets.
Modified the muzzle piece to make it easier to print and harder to break, also reducing overall length a tiny bit.
Flattened the designs on the main body for an easier print, removed the unnecessary sight mount on top of the body.
Added more lines onto the buttstock plate for more friction when shouldering the gunstock

Edit 13/11/2023
Added an extra groove on the back end of stock tube for easier assembly when putting on/taking off the stock, now it can slide right off the back when handle is pressed

HOW TO PRINT

Print the buttstock parts as is, pretty obvious which side to print on.
Print the muzzle with the front side touching the build plate (the flat side).
Print the stock tube with the rear side on the build plate (the side closest to your sholder) the tube should be slanted when placed correctly.
Print the main body with the rear square side on the build plate. you may want to use a brim due to small surface area on the build plate.
You might want an 4 layer wall due to the thinner body, also use 35%-50% infill.

No supports are needed for all parts.

NON-PRINTED PARTS

M3x40mm caphead for buttstock lever
0.5x6x20mm spring for buttstock lever
M3 nut for buttstock lever
2x M3x5mm caphead for buttstock cusion
2x M4x18mm wood screw for controller mounts
2x Thin one-sided rubber sticker for controller mounts
1/2’’ 400mm steel pipe for barrel

Magnets
28 x 5mm 55 LB Force pot magnet for left hand mount
https://www.amazon.co.uk/dp/B07Q5R1ZLJ?psc=1&ref=ppx_yo2ov_dt_b_product_details
32 x 8mm 44 kg Force pot magnet for right hand mount
https://www.first4magnets.com/countersunk-c41/32mm-dia-x-8mm-thick-x-5-5mm-c-sink-n42-neodymium-pot-magnet-44kg-pull-p3478#ps_0_3568|ps_1_1557

Countersunk hole size for both magnets can vary from 4 - 5.5mm

QD Sling Mounts are available on both buttstock and main body