Grand Archive Champion tray with dice slots

Small project I made for a recently released table top TCG called Grand Archive. More info here:
https://www.gatcg.com

It holds your Champion from Lv. 0 to 3 through grooves on the side and has dedicated slots for D20 and D6 dice. The D20 slots are for counting life and the D6 slots can be used for counting other mechanics or vice versa.

The D20 slots are for dice 22mm of size or smaller. The D6 slots are for dice 12mm of size or smaller. I specifically use the Oakie Doakie 12mm dice.

I made 3 different versions with different dice setups. I also included one version without any dice slots, but feel free to remix your own.

Printed with nozzle temp at 215° C. and bed temp at 60° C.

Be sure to add supports for the grooves because they will surely sag without them. Don't use support interfaces since that's too thick to remove properly from the finer grooves of the print (learned that the hard way). Be very careful removing the supports, as you might get some pieces stuck in corners or destroy the print.

Remixed from DraftingDigitals 'MTG Planeswalker Tray' - see 'Remixed from'.