Nerf Foamy 2.0

Here is what I have so far. I will try and add a link to all the Parts you need to order. I will try and answer your questions as they come. I also have the current Fusion File. I will update as time goes on. Just needed to get this out there for you guys to play with.

my printer currently prints very accurately. I use the Inch system. I have included my own calibration part called "Test Piece" it is 1.25" by 0.75" by .125" High. the Hole in the middle is 0.25"

Motor: https://outofdarts.com/products/meishel-2-0-130-2s-motor-for-nerf-blasters

Switch:https://www.amazon.com/Twidec-Action-Button-Microwave-V-15-1C25/dp/B07NVD4YZZ/ref=sr_1_6?crid=2760S7XOFFV1I&keywords=micro%2Bswitch&qid=1699488439&sprefix=micro%2Bswitch%2Caps%2C138&sr=8-6&th=1

Batteries: https://www.amazon.com/URGENEX-Battery-Rechargeable-Quadcopter-Charger/dp/B08T9FB56F/ref=sr_1_30?crid=1PY05SJQD3KO1&keywords=1s+battery+lipo&qid=1699488470&sprefix=1s+bat%2Caps%2C107&sr=8-30

Wire: https://www.amazon.com/dp/B07DDG7J9K?ref=ppx_yo2ov_dt_b_product_details&th=1

Skewers: Walmart
Rubber bands: Walmart