Summary

Modled and printed these for a wedding center pieces.
Print Settings

Printer Brand:
Anycubic
                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>Kobra Go</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>Yes</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>Yes</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>.2</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>100% for strangth</p></div></p>                                                    <strong>Filament:</strong> Polymaker Silk PLA                Silver and Gold Silk PLA                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>Tree supports are very useful for these,<br>Maximum Branch Angle set at 50.0 degrees</p><p>Branch Diameter 5.0mm</p><p>Branch Diameter Angle 7.0 degrees</p><p>Support Placement Touching Buildplate</p><p>Support Overhang Angle 45.0 degrees<br>^^^^^^^^^^<br>These are the most important I found! </p><p>I didn't print these fast each took roughly 40 hours to print, using about 300grams of filament</p></div>
D20 Center Pieces
