Summary

Printed with .4 Nozzle with .2 layer height.
For a bit of contrast, add a change of color before the top few layers of the connecting lines/"roads" will give this a nice bit of contrast.
Holes fit 5mm X 2mm magnets

Print Settings

Printer Brand:

Sovol 3D

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>Sovol SV06</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>.2</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>15% - 100%</p></div></p>                                                    <strong>Filament:</strong> Any PLA                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>Better with two different contrasting colors for the top of the roads and posts.<br>I'm not super happy with the piece but works for now.</p><p>Don't forget to align the magnets with the correct poles, all one side for the board and the other for the pieces. </p><p>I tried printed the pieces a couple of times without brims but each failed with pieces popping of the plate. Brims fixed the issue for me, but may not be required if you have good bed adhesion.</p></div>

Nine Men's Morris with Magnets