Summary

Lithophane of a photo from the photo shoot for the Taylor Swift album Midnights.

The image was pulled from a post by @4k_taylorr on twitter.

The lithophane was rendered using the online tool ItsLitho.

Print Settings

Printer Brand:

Creality

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>Ender 3</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>Doesn't Matter</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>Doesn't Matter</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.12</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>0%</p></div></p>                                                    <strong>Filament:</strong> Overture PLA                White                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>No infill, instead I used 5 walls.<br>Print slow for best quality. I use 35 mm/s.<br>The model has a stand attached to the bottom. It helps prevent wobbling during the print and is a convenient way to display the print when it’s done. Easy to remove if you don’t want it, though. Just place on its face in your slicer and cut it off.<br>I did use a brim to make sure there’s good bed adhesion throughout the print, just to be safe. </p></div>

Taylor Swift Midnights Lithophane