Mount for CTEK CS connect U terminal

2 part mount to attach a CTEK CS Connect U terminal cable connector to a pannel with a 25.4 mm hole.

Fit the left and right part over the CS connector. The cilindric chape of the parts should be at the CTEK connector opening. Assemble the parts 2 mm from the connector front to allow for the clip of the male connector to engage.

The 2 parts are fixed with M3 bolt and nut. The assembly is designed to fit in a 25.4 mm hole and are fixed to a panel again using M3 bolts and nuts.

The design was made to be able to easily connect a CTEK trickle charger to a generator to increase battery life.