Summary

I always thought the steam and water knobs on my Expobar Minore IV looked unfinished with the screw plainly visible so I made some covers

As the cutout hole in the knobs has straight sides , I needed to make the covers in 2 parts. The base is held in by the original screw and the cover clips into the base.

I found that they are easy enough to remove for maintenance and just look so much nicer

Print Settings

Printer Brand:

Prusa

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>I3 MK3S</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.15</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>50%</p></div></p>                                                    <strong>Filament:</strong> Yxpolyer PETG                White                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>I used PETG for this because espresso machines are a bit too hot for PLA. </p></div>

Expobar Steam Knob Trim