Summary

My wife designed this box to be part of a gift.
The other half is this pin/brouche: https://www.thingiverse.com/thing:630577

There are two different lids, one blank that can be customized and one with "Hand of the King" on it.

Print Settings

Printer Brand:

Creality

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>CR-10</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.2 LH</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>15%</p></div></p>                                                    <strong>Filament:</strong> Evryone PLA Silk                Browns or Darker Metal Colors, just my opinion                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>Printed on a CR-10SE with multiple brands of silk PLAs but the best seem to be made from Evryone Silk PLA.  I used the default CR Silk profile settings in Creality Print, but changed the speed and travel speed to 30 mm/s.  Print with at least a 5mm brim to prevent bed adhesion issues or use glue stick.</p><p>Also used a textured build plate to give that pattern to the box surface that was touching the build plate.</p></div>

Hand of the King Box