Summary

I tried the original, but it turns out I needed one for a 1-7/8" hose.

Print Settings

Printer Brand:

Voxelab

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>Aquila S2</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>.28</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>15% Honeycomb </p></div></p>                                                    <strong>Filament:</strong> Inland TPU                Translucent green                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>I print with a .6 nozzle, 2 walls ~1.2 mm thick. This leaves space in between the interior and exterior for ease of compression. Adjust your infill for more or less squish. </p><p>Turn off retraction, set it to avoid crossing perimeters. I print TPU between 210-215. </p><p>If adhesion is an issue, add some tabs that can get easily snipped off with wire cutters. I prefer not to use brims with TPU. </p></div>

How I Designed This

Modified on Fusion 360 to fit a 1-7/8" hose

BOSCH ROS20VSC to 1-7/8 Rigid vac hose